英文:
From Ubuntu kvm I am unable to connect to synology Disk Station iSCSI target
问题
我的目标是在 Synology Disk Station 中创建一个用于 KVM 的存储池，其中包含一个 iSCSI 目标。
我已经在 Synology Disk Station 中创建了一个 iSCSI 目标，没有启用 CHAP。我能够连接并在 ESXi 中使用此目标，但在 KVM 中无法做到同样的事情。
要在 ESXi 中连接到它，我不得不在 Synology Disk Station 中添加一个主机，并提供了 initiator iqn。
我尝试为 KVM 在 Synology Disk Station 中添加主机，但我找不到任何方法来获取 KVM 的 initiator iqn。我不确定是否需要添加主机。
使用 Cockpit 我尝试创建一个存储池。
我输入正确的主机和 iqn 并创建了池，然后点击激活。不久后，我收到错误消息“方法调用 Create 超时”。
目标可以使用 sudo isnsadm --list nodes --local 进行查询，但这是我能够实现的最多的内容。
我还可以尝试什么？
英文:
My goal is to create a storage pool for KVM with an iSCSI target hosted in Synology Disk Station.
I've created an iSCSI target in Synology Disk Station, with no Chap.
I am able to connect to and use this target in ESXI, but I am unable to do the same in KVM.
To connect to it in ESXI I had to create add a Host in Synology Disk Station and provided the initiator iqn.
I attempted to add a Host in Synology Disk Station for KVM but I cannot find any wait to get the KVM initiator iqn. I'm not sure if the Host is needed or not.
Using Cockpit I've attempted to create a storage pool.
I enter the correct host and iqn and create the pool, then I click activate. Shortly after I get the error method call Create timed out.
The target is query-able using sudo isnsadm --list nodes --local but that is the most I've been able to achieve.
What else can I try?
答案1
得分: 0
地址连接需要匹配 iSCSI 网络绑定。
我在我的 Synology 中发现，我只绑定了3/4个网络接口，而第四个接口正是我尝试连接的接口。
英文:
The address connecting with needs to match iSCSI network bindings.
I found in my synology I was only binding to 3/4 nics and the 4th is the one I was attempting to connect on.
通过集体智慧和协作来改善编程学习和解决问题的方式。致力于成为全球开发者共同参与的知识库，让每个人都能够通过互相帮助和分享经验来进步。
评论